Comment créer une deuxième partition pour Link2SD?
Pour "Link2SD", vous devez créer une deuxième partition sur la carte SD. Si vous l'avez, vous pouvez utiliser l'application Android pour déplacer et lier le cache Dalvik et les applications installées à la carte mémoire externe - même avec des smartphones comme le Galaxy S3 ou le Samsung Galaxy Note II, sur lesquels "App2SD" ne fonctionne pas. Nous vous montrons comment créer la partition nécessaire pour l'outil racine en trois étapes.
Préparation: ce dont vous avez besoin pour la partition Link2SD
Avant de commencer à partitionner votre carte mémoire, vous devez connaître les éléments suivants:
- Pour utiliser "Link2SD", vous devez disposer des droits root sur votre smartphone. Une ROM personnalisée n'est pas requise.
- Vous avez besoin d'une carte mémoire externe compatible avec votre téléphone Android. Les meilleures cartes microSDHC se trouvent dans notre classement CHIP.
- Pour partitionner la carte SD, vous avez besoin d'un PC / ordinateur portable avec un emplacement pour carte SD ou d'un lecteur de carte SD externe.
- Lorsque vous partitionnez votre carte SD, toutes les données qui y sont stockées seront perdues! Par conséquent, assurez-vous de sauvegarder vos données. Pour ce faire, vous devez disposer de suffisamment d'espace libre sur votre PC.
Étape 1: sauvegarde de la carte SD et suppression de la partition
Pour commencer à partitionner votre carte mémoire pour une utilisation avec "Link2SD", vous devez l'insérer dans la fente du lecteur de carte de votre PC ou ordinateur portable.
- Copiez tous les fichiers de la carte SD sur votre PC. Vous pouvez utiliser n'importe quel répertoire pour cela.
- Téléchargez gratuitement le "MiniTool Partition Wizard". Si vous utilisez un Mac ou Linux, vous pouvez utiliser "GParted Live" comme outil de partitionnement, par exemple. Avec cet outil, la procédure peut varier légèrement - Dans ce guide, nous vous montrons comment utiliser le programme Windows.
- Une fois le programme téléchargé, ouvrez le fichier d'installation et suivez les instructions. Une fois l'installation terminée, l '"Assistant de partition" s'ouvre automatiquement.
- Dans la liste, vous pouvez maintenant voir tous les supports de données connectés, y compris le ou les disques durs de votre ordinateur. Assurez-vous de sélectionner la carte SD insérée (voir capture d'écran)! Faites un clic droit sur la partition de la carte mémoire et sélectionnez "Supprimer" comme indiqué dans l'image.
Étape 2: créez les deux partitions pour Link2SD
Maintenant, la carte mémoire doit être partitionnée en deux parties:
- Faites un clic droit sur la carte SD dans l'outil de partitionnement et sélectionnez "Créer".
- Dans la fenêtre nouvellement ouverte, entrez une "étiquette de partition" librement sélectionnable, c'est-à-dire un nom pour la partition. Depuis que nous créons d'abord la partition pour toutes les données, "mémoire SD" est sélectionnée dans l'exemple. Après "Créer en tant que", choisissez "Principal". Nous recommandons "FAT32" comme système de fichiers. Ci-dessous, vous déterminez la taille que vous souhaitez utiliser pour cette partition. Choisissez une plage si grande que l'espace restant est suffisant pour la partition Link2SD. Pour la carte SD avec 64 Go d'espace de stockage utilisé dans le test, nous sélectionnons 57 Go pour cette partition. Sur la capture d'écran, vous pouvez voir tous les paramètres sélectionnés. Cliquez ensuite sur "OK".
- Nous créons maintenant la deuxième partition pour "Link2SD": Dans l'aperçu, cliquez sur l'espace de stockage inutilisé sur la carte SD. "Non alloué" est spécifié ici sous "Système de fichiers". Sélectionnez à nouveau "Créer", l'avertissement contextuel doit être confirmé par "Oui". Il est important de sélectionner à nouveau "Principal" sous "Créer en tant que". Vous pouvez utiliser "Ext2", "Ext3" ou "Ext4" comme système de fichiers. Cela dépend de votre ROM installée: utilisez la ROM d'origine, sélectionnez Ext2. Avec la ROM Omega de l'appareil de test, nous pouvons sélectionner "Ext4". Confirmez ensuite les paramètres avec "OK".
Étape 3: la carte SD partitionnée - voici à quoi elle devrait ressembler
Si vous avez suivi les deux premières étapes, la carte SD dans l'aperçu "Partition Wizard" devrait ressembler à la capture d'écran:
- Les deux partitions sont définies comme "primaires".
- La plus grande des deux partitions utilise le système de fichiers "FAT32", la partition Link2SD "EXT *".
Si tel est le cas, vous pouvez maintenant confirmer le partitionnement de la carte SD:
- Dans la fenêtre principale de "l'Assistant de partition", cliquez sur "Appliquer" dans le coin supérieur gauche. Avertissement: assurez-vous que vous avez enregistré les fichiers sur votre carte SD. La carte mémoire est maintenant formatée puis partitionnée pour la préparer à une utilisation avec "Link2SD".
- Attendez la fin du processus de partitionnement. Pendant ce temps, ne retirez pas la carte SD du lecteur de carte!
- Une fois le processus terminé, la carte mémoire est prête à être utilisée avec "Link2SD". Vous pouvez maintenant copier les fichiers précédemment sauvegardés sur la carte SD.
Tout est fait: Confirmation de la deuxième partition avec Link2SD
Si vous avez suivi les trois étapes de partitionnement de votre carte SD, vous pouvez désormais utiliser l'application Android "Link2SD":
- Téléchargez et installez "Link2SD" sur votre smartphone si vous ne l'avez pas déjà fait.
- Insérez la carte mémoire partitionnée dans votre smartphone. Vous devrez peut-être redémarrer votre téléphone.
- Ouvrez "Link2SD". Confirmez la demande de droits root. L'application Android demande maintenant le système de fichiers de la deuxième partition de votre carte SD, la partition pour les applications. Puisque nous avons sélectionné "Ext4" dans l'exemple, nous entrons également "Ext4" ici. Ensuite, vous devez redémarrer votre téléphone portable.
- Si la question sur le système de fichiers ne se pose plus lors du prochain démarrage de l'application, le processus a réussi. Vous avez créé la deuxième partition pour "Link2SD" et pouvez maintenant déplacer et lier des applications à la carte mémoire externe de votre smartphone Android.
Un ordinateur portable avec Windows 7 Ultimate 64 bits et un Samsung Galaxy S3 avec Omega v40 (XXEMA2, Android 4.1.2) ont été utilisés pour ces instructions.
$config[ads_text5] not found