Calculer le taux d'échantillonnage pour les enregistrements - comment cela fonctionne
Avec quelques formules, vous pouvez calculer la fréquence d'échantillonnage pour les enregistrements audio. Selon votre objectif, un taux d'échantillonnage différent peut signifier une taille de fichier minimale avec un avantage maximal.
Comment calculer le taux d'échantillonnage requis
La fréquence d'échantillonnage optimale de votre enregistrement audio dépend de ce que vous appréciez: Chaque fréquence d'échantillonnage est un compromis entre la qualité sonore, l'intelligibilité, la taille du fichier et la compatibilité:
- En général: comme la conversion des taux d'échantillonnage fonctionne rarement sans perte, vous devez toujours effectuer toutes les étapes du taux d'échantillonnage cible.
- Cela affecte l'enregistrement, la lecture et l'édition, tels que la coupe et l'ajout d'effets.
- Cela signifie un taux d'échantillonnage de 44, 1 kHz pour les CD audio et généralement de 48 ou 96 kHz pour les DVD et Blu-Ray.
- Sinon, le théorème de Nyquist-Shannon s'applique: La fréquence d'échantillonnage fₓ doit être au moins deux fois plus élevée que la fréquence critique fᵨ, c'est-à-dire la fréquence la plus élevée à enregistrer, c'est-à-dire fₓ> 2 × fᵨ.
- Si vous souhaitez choisir la fréquence d'échantillonnage afin de ne pas dépasser une certaine taille de fichier G, utilisez la formule suivante:
- Vous pouvez calculer la taille de fichier G d'un enregistrement PCM, c'est-à-dire de fichiers WAV ou AIFF non compressés, comme suit: G = D × fₓ × nombre de canaux audio × durée d'enregistrement, où D est la profondeur de l'échantillon et la durée d'enregistrement est donnée en secondes. Pour MP3 et AAC, vous pouvez vous attendre à G rate débit binaire × durée d'enregistrement.
- Contrairement à la fréquence d'échantillonnage, la profondeur d'échantillonnage est la même. Plus de bits ne peuvent pas nuire à la qualité, dans le pire des cas, ils prendraient inutilement beaucoup de temps de calcul et d'espace de stockage ou seraient incompatibles avec du matériel bon marché.
- Il est même courant que les effets audio numériques calculent 32 bits en interne, même si vous vous retrouvez avec seulement 16 à 24 bits.
- Si vous avez besoin d'une précision temporelle inférieure à 23 µs, vous devez définir une fréquence d'échantillonnage supérieure à 44100 Hz.
- Les DVD prennent en charge jusqu'à 192 kHz pour mono et stéréo, et au moins 96 kHz pour plus de canaux. Le Blu-Ray prend en charge jusqu'à six canaux à 192 kHz ou jusqu'à huit canaux à 96 kHz. Assurez-vous que votre appareil de lecture maîtrise également des taux d'échantillonnage aussi élevés.
- Chez Apple, seuls quelques appareils ont un taux d'échantillonnage de 192 kHz: MacBook Pro (Retina, 13 ou 15 pouces à partir de 2013), Mac Pro (à partir de fin 2013), iMac (21, 5 pouces, mi-2014) et Mac mini (fin 2014 ).
- Un taux d'échantillonnage de 32 kHz est la qualité des bandes audio qui n'enregistrent pas et ne reproduisent pas tout le spectre audible, mais atteignent jusqu'à environ 14, 5 kHz.
- Afin d'obtenir une bonne intelligibilité de la parole avec de petites tailles de fichier pour les enregistrements vocaux, l'enregistrement à une fréquence d'échantillonnage de 22050 Hz avec conversion ultérieure en MP3 ou AAC avec 56 à 64 bits par canal convient.
- Avec un taux d'échantillonnage de 8 kHz, vous n'atteignez pas tout à fait la qualité des transmissions téléphoniques ou de certaines mini-machines à dicter.
- Soit dit en passant: pour enregistrer la hauteur pure des mélodies, quelle que soit la qualité sonore, environ 1400 Hz est plus suffisant pour les hommes, 1800 Hz pour les femmes.